AutoFEM Finite Element Analysis Verification Tests

Contents | Index

• Verification Tests based on Tetrahedral Finite Elements
  • Static Analysis
    • Bending a Cantilevered Beam under a Concentrated Load
    • Bending a T-shaped Beam
    • Deflection of a Beam under a Uniformly Distributed Load
    • Static Analysis of a Round Plate Clamped along the Contour
    • Square Plate Subjected to Force at Center
    • Clamped Square Plate Under a Uniformly Distributed Load
    • Cylindrical Reservoir with Walls of Constant Thickness
    • Torsion of Shaft with Circular Cross-section
    • Torsion of a Beam with the Square Cross-Section
    • Bar Subjected to Self-Weight
    • Analysis of Rotating Solid Disc of Constant Thickness
    • Deflection of a Cantilevered Beam under a Weight at its End
    • Beam on Elastic Foundation
    • Large Deflection of a Circular Plate
    • Deflection of the Beam under the Action of Three Forces
    • Beam under the Action of Two Tensile Forces
    • Torsion of a Shaft under the Action of Two Torques
    • Stresses of an Orthotropic Plate at Biaxial Tension
  • Thermoelasticity
    • Thermal Deformations of a 3-D Brick
  • Contact problems
    • Contact of Flat Spring
    • Contact Between a Cylindrical Bar and the Eye Ring
  • Frequency Analysis
    • Natural Frequencies of a Cantilever Beam
    • First Natural Frequency of the Cantilever Beam under the Stretching Longitudinal Force
    • Determining the First Natural Frequency of a Round Plate
    • Natural Vibrations of Spherical Dome
    • Bending Vibrations of a Circular Ring
    • Axial and Transverse Vibration Frequency of a Beam with a Weight
    • First Natural Frequency of a Spring-Mass System
  • Buckling Analysis
    • Buckling Analysis of a Compressed Straight Beam
    • Buckling Analysis of Square Plate
    • Buckling Analysis of Rectangular Plate
  • Forced Harmonic Oscillation
    • Forced Oscillation of a Spring-Mass System
    • Vibrations of a Spring-Mass System Because of Oscillating Foundation
  • Thermal Analysis
    • Steady-State Temperature of a Multilayer Wall
    • Flow of Heat in a Sphere
    • Thermal Conductivity of a Cylindrical Wall
    • Thermal Contact Between Plain Plates
    • Thermal Contact Between Cylindrical Surfaces
    • Thermal Contact Between Spherical Surfaces
    • Disk with a Constant Temperature on the External Cylindrical Surface is being heated along the axis
    • Distributed Heat Source applied to the Cylindrical Surface inside the Disk
    • Point Power Source inside the Sphere
    • Temperature Field of a Thermal System of a Heat Sink and a Chip
    • Orthotropic Graphite Plate under Steady State Temperature Regime
    • Temperature Field of a Two Cylinders with a Thermal Resistance Between
    • Isotropic Plate under Heat Flux and Convection
    • Thermal Heat Flux in an Isotropic Disk
    • Radiation of a Plate into External Environment
    • Hollow Sphere Radiating Outwards
    • Non-Stationary Temperature Field in an Isotropic Sphere
    • Non-Stationary Temperature Field in an Isotropic Sphere with the Heat Transfer on the Surface
    • Non-Stationary Temperature Field in an Isotropic Sphere with Convection on the Surface
    • Non-Stationary Temperature Field in an Isotropic Cylinder
    • Non-Stationary Temperature Field in an Orthotropic Plate
  • Dynamic Analysis
    • Bending of a Simply-Supported Beam Under Impact in the Middle
    • Bar Loaded with Sinusoidal Force on the Free End
    • Hollow Shaft Loaded with Sinusoidal Torque on the Free End
    • Shaft with a Wheel Loaded with Sinusoidal Torque
    • Shaft with a Wheel Loaded with Torque Linearly Increasing to a Constant Value
• Verification Tests based on Triangular Finite Elements
  • Static Analysis
    • Bending a Cantilevered Beam under a Concentrated Load (surface)
    • Bending a T-shaped Beam (surface)
    • Deflection of a Plate under the Gravitation
    • Static Analysis of a Round Plate Clamped along the Contour (surface)
    • Square Plate Subjected to Force at Center (surface)
    • Clamped Square Plate under a Uniformly Distributed Load (surface)
    • Cylindrical Reservoir with Walls of Constant Thickness (surface)
    • Torsion of a Tube with Ring Cross-Section
    • Static Analysis of Rotating Solid Disc of Constant Thickness (surface)
    • Deflection of the Beam under the Action of Three Forces (surface)
    • Strip under the Action of Two Tensile Forces
    • Torsion of a Thin Tube under the Action of Two Torques
    • Deflection of a Plate under Pressure
    • Infinite Beam on Elastic Foundation
    • Large Deflection of a Circular Plate (surface)
  • Thermoelasticity
    • Thermal Deformations of a 2-D Plate
  • Frequency Analysis
    • Natural Frequencies of a Cantilever Beam (surface)
    • First Natural Frequency of the Cantilever Beam under the Stretching Longitudinal Force_2
    • Determining the First Natural Frequency of a Round Plate (surface)
    • Natural Vibrations of Spherical Dome (surface)
    • Bending Vibrations of a Circular Ring (surface)
    • Axial and Transverse Vibration Frequency of a Beam with a Weight (surface)
  • Buckling Analysis
    • Buckling Analysis of a Compressed Straight Beam (surface)
    • Buckling Analysis of Square Plate (surface)
    • Buckling Analysis of Rectangular Plate (surface)
    • Buckling Analysis of a Compressed Straight Tube (surface)
  • Forced Harmonic Oscillation
    • Forced Oscillation of a Simply Supported Plate
    • Vibrations of a Simply Supported Plate Because of the Middle Point Oscillation
  • Thermal Analysis
    • Disk Having a Constant Temperature on the External Cylindrical Surface and Being Heated along the Axis (surface)
    • Distributed Heat Source Applied to the Cylindrical Surface inside the Disk (surface)
    • Thermal Heat Flux in an Isotropic Disk (surface)
  • Dynamic Analysis
    • Bending of a Simply-supported Beam Under Impact in the Middle
    • Hollow Shaft Loaded with Sinusoidal Torque on Free End
• Copyright

2018 AutoFEM Software LLP. All rights reserved.