Verification Tests of AutoFEM Analysis based on Triangular Finite Elements

Version 3.x

In this chapter we review the results of solving several model studies that have an analytical solution, in order to assess the accuracy of the finite element analysis system output.

 

Static Analysis

Bending a cantilever beam under a concentrated load
Bending a T-shaped beam
Deflection of a plate under the gravitational load
Static Analysis of a round plate clamped along the contour
Square plate subjected to force at centre
Clamped square plate under a uniformly distributed load
Cylindrical reservoir with walls of constant thickness
Torsion of a thin tube
Static Analysis of rotating solid disc of constant thickness
Deflection of the beam under the action of three forces
A strip under the action of two tensile forces
Torsion of a thin tube under the action of two torques
Deflection of a plate under pressure
Bending a cantilever beam under a concentrated load
Bending a T-shaped beam
Deflection of a plate under the gravitational load
Static Analysis of a round plate clamped along the contour
Square plate subjected to force at centre
Clamped square plate under a uniformly distributed load
Cylindrical reservoir with walls of constant thickness
Torsion of a thin tube
Static Analysis of rotating solid disc of constant thickness
Deflection of the beam under the action of three forces
A strip under the action of two tensile forces
Torsion of a thin tube under the action of two torques
Deflection of a plate under pressure
 

Thermoelasticity

Thermal deformations of a 3-D brick

 
Frequency Analysis

Determining natural frequencies of beam vibration
First natural frequency of the cantilever beam under the stretching longitudinal force
Determining the first natural frequency of a round plate
Natural vibrations of spherical dome
Bending vibrations of a ring
Axial vibration frequency and transverse vibration frequency of the beam with the weight
First natural frequency of the spring-mass system
 

Buckling Analysis

Buckling Analysis of a compressed straight beam
Buckling Analysis of a square plate
Buckling Analysis of rectangular plate
Buckling Analysis of a compressed straight tube
 

Forced Harmonic Oscillation

Forced Oscillation of a simply supported plate
Vibrations of a simply supported plate because of the middle point oscillation

 

Thermal Analysis

Disk having a constant temperature on the external cylindrical surface is being heated along the axis
Distributed heat source applied to the cylindrical surface inside the disk
Thermal heat flux in an isotropic disk

 

Dynamic Analysis

Bending of a Simply-supported Beam Under Impact in the Middle

Hollow Shaft Loaded with Sinusoidal Torque on the Free End

 

 

autofem.com

Return to contents